Mike Pruzinsky from @ReedPipeTools shares the Feed Tap Drilling Machine. To learn more about this product, visit: https://www.reedmfgco.com/en/products/water-services-tools/feed-tap-drilling-machine/

Shannon Lessner with @ReedPipeTools shares the Pump Stick which has been very popular since it launched three years ago. This products pumps 15 gallons per minute, is compatible with several battery manufacturers, and has a magnetic hose in 2, 4, and 7 feet. To learn more, visit: https://www.reedmfgco.com/en/products/general-pipe-working-tools/pump-stick-cordless-power-water-pump/

Mike Pruzinsky with@ReedPipeTools shares the DS12 Pipe Descaler. This descaler will work on all pipes ranging in size from 3-12 inches. To learn more about this product, visit: https://www.reedmfgco.com/en/products/cutters-and-cutter-wheels/pipe-descalers/

Mike Pruzinsky with @ReedPipeTools shares the Bevel Boss. This product is designed to fit on Bosch, DeWalt, and Milwaukee Die Grinders. To learn more, visit: https://www.reedmfgco.com/en/products/plastic-pipe-tools/pipe-beveler-adapters/

Dan Reinecke with Reed shares the Reed Cordless Pump Stick. This pump is battery operated and can run for a full hour on a single charge. Battery adapter plates accommodate the different major brands. This product can pump 15 gallons of water per minute and has a replaceable motor. To learn more, visit: https://www.reedmfgco.com/en/products/general-pipe-working-tools/pump-stick-cordless-power-water-pump/

Dan Reinecke with Reed shares the Bevel Boss. This product is particularly helpful in taking gas saws out of the picture, thus improving the customer safety. To learn more, visit: https://www.reedmfgco.com/en/products/plastic-pipe-tools/pipe-beveler-adapters/

Jeff Esmont with Reed Manufacturing shows their new Feed Tap™ designed for saddle tapping. It comes complete with everything you'll need: all the different adapters that you need for all the different types of corporations. It also has a Coupon Retaining Bit that will pull the coupon along with the bit so you can turn your coupon in and get paid for your hole that you just drilled. You can use a drill, but it's hand-fed, so you're doing the feed as you're drilling into the hole. You can feel the bit cutting through. You allow the bit to do its work, and it takes less than a minute to get your hole set up. To learn more, visit: https://www.reedmfgco.com/en/products/water-services-tools-and-machines/feed-tap-drilling-machine/

Jeff Esmont with Reed Manufacturing discusses their Bevel Boss™, a new tool for valve exercising. All the cities require that they exercise their valves, so they can shut off the water or the gas pipe. The Bevel Boss has a clutch built into it, or added to it, so it it won't throw you around. It also has a counter to keep track of revolutions. If you put it in reverse, it'll count backwards to zero, so you know when it stops. It also has another head that you can use for water tapping, direct taps or saddle taps. Put it on the drill tapping machine, and run it away. To learn more, visit: https://www.reedmfgco.com/en/products/plastic-pipe-tools/bevel-boss-cordless-pipe-bevelers/

Jeff Esmont with REED Manufacturing demonstrates the new Bevel Boss with the DeWalt grinder. This tool is designed to put a clean, consistent bevel on a pipe, so when it is joined with pipe fittings, it doesn't break the seal. The tool is quick and easy to use and leaves a factory quality bevel. For more information, visit: https://www.reedmfgco.com/en/

Jeff Esmont with REED Manufacturing demonstrates the new Bevel Boss with the DeWalt grinder. This tool is designed to put a clean, consistent bevel on a pipe, so when it is joined with pipe fittings, it doesn't break the seal. The tool is quick and easy to use and leaves a factory quality bevel. For more information, visit: https://www.reedmfgco.com/en/